Whirlpool ADG 6500 IN Instruction for Use download pdf

1. Removal of packaging and inspection:

After removing the packaging, check that the

machine has not been damaged din transit and

that the door closes correctly.

If in doubt, contact a qualified technician or

your retailer.

• Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of

children, as they are potentially hazardous.

• This dishwasher has been factory tested to

ensure it functions correctly.

Such testing may leave slight water marks that

will disappear with the first wash.

2. Electrical connections and hose

connections:

All connections to the water supply and the

electrical power supply must be made by

qualified personnel in accordance with the

manufacturer’s instructions and applicable local

safety regulations (see also the enclosed

installation instructions).

This dishwasher is designed for domestic use.

Do not use the dishwasher if it has any signs of

damage sustained in transit. Contact After-Sales

Service or your local dealer.

(Refer to the separate installation

instructions booklet)

3. Water inlet and drain:

• Observe any special regulations issued by

your local Water Board.

Water supply pressure: 0.05 - 0.9 MPa.

• Make sure the inlet and drain hoses are kink-

free and are not crushed.

• If the hose length is not sufficient, please

contact your local dealer or our After-Sales

Service.

• The inlet hose must be securely connected to

the water tap to prevent leaks.

• The inlet water temperature varies according

to the model installed. Inlet hose marked

”25°C Max”: maximum temperature 25°C.

All other models:maximum temperature

60°C.

• When installing the appliance, make sure the

drain water discharges correctly (if necessary,

remove the wire gauze from the sink siphon).

• Attach the drain hose to the siphon securely

using a hose clip.

Only for appliances equipped with water stop

system: if the connection instructions are

followed correctly, the water stop system is

able to prevent water leaking from the

appliance and damaging your home.

4. Electrical connection:

• All local electricity board regulations must be

complied with.

• Supply voltage information is shown on the

rating plate mounted inside the door on the

right hand side.

• The appliance must be earthed as prescribed

by law.

• Do not use extension leads or multiple socket

adapters.

• Always unplug the appliance from the mains

socket before carrying out any maintenance.

• If necessary, the power cable may be replaced

with an identical one obtained from our

After-Sales Service. The power cable must

only be replaced by a qualified technician.

Warning for models with LCD:

The mains plug must always be easily accessible

after installation of the appliance.

• Per l’Austria: if the appliance is connected in

series to a fault current circuit breaker, this

must be sensitive to the pulsating current.

EC Declaration of conformity

This appliance has been designed, constructed and

distributed in compliance with the safety

requirements of EC Directives:

• 73/23/EEC

• 89/336/EEC

• 93/68/EEC

Load capacity:

12-13-14 place settings (depending on the model).

BEFORE USING THE DISHWASHER /

CONNECTIONS

1 2 3 4 5 6

Summary of Contents

Page 1 - CONNECTIONS

101. Removal of packaging and inspection:After removing the packaging, check that themachine has not been damaged din transit andthat the door closes

Page 2 - RECOMMENDATIONS

111. Packaging:The packaging materials are 100% recyclable, asindicated by the recycling symbol .2. Energy and water saving tips:• Do not rinse dishe

Page 3

If the water hardness level is 1-2 (medium) or higher, before using the dishwasher, fill the salt containerwith regeneration salt (to find out the har

Page 4

13Salt level indicatorThe dishwasher is equipped with an electric or visual salt levelindicator (depending on the model installed).Electric indicatorT

Page 5

14Only use detergents recommended for use in domestic dishwashers.Only fill the detergent dispenser prior to starting a washprogramme (see the Quick R

Page 6 - CARE AND MAINTENANCE

Before cleaning or carrying out maintenance, switch off the appliance and turn off the water tap.Cleaning the outside of the appliance:To clean the ou