Whirlpool ADG 993/3 WH Instruction for Use

12 GB SUMMARYBEFORE USING THE DISHWASHERPAGE13PROTECTING THE ENVIRONMENTPAGE13PRECAUTIONS AND GENERAL RECOMMENDATIONSPAGE13ENERGY AND WATER SAVING TI

21If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem.Restart the wash programme to

13•After unpacking, make sure the appliance is undamaged and that the door closes correctly. Do not use the appliance if it is damaged. If in doubt, c

14 Check the water hardness level in your area. Consult your local Water Board or check your last water bill.• Set the water hardness by turning the

15The rinse aid facilitates drying and prevents the formation of unsightly spots and streaks on crockery. Before using the dishwasher for the first ti

16 Only use detergents recommended for use in domestic dishwashers. If you use “new generation” enzyme-based detergents, select the Bio programmes wh

17Close the dishwasher door and turn on the water tap.1.Press the ON/OFF button to switch on the dishwasher. Select the programme required by turning

18 Refer to the separate installation instructions booklet.Water inlet and drain:•Strictly follow local Water Board regulations.•Make sure the inlet

191) ELECTRICAL CONNECTIONS“Warning - this appliance must be earthed”This appliance is normally supplied with a mains lead having a plug fitted in the

20 Before cleaning or carrying out maintenance, press the ON/OFF button.1.Clean the appliance exterior with a neutral detergent. Do not use abrasive