Whirlpool DU920QWDB4 Specifications download pdf (Page 12)

Using the rinse agent dispenser

Keep the rinse agent dispenser filled with a

liquid rinse agent.

A

rinse agent

greatly

improves dish drylng by helping water

flow off them during the last rinse.

A rinse

agent also keeps water from forming

droplets and drying as spots or streaks.

A small amount of rinse

agent

automati-

cally releases into the rinse water during the

final rinse of each cycle.

For best drylng

results, check dispenser periodically to

see if It needs filling.

To check dispenser:

l Check center of fill indicator cap. Clear

means it needs filling.

OR

l Remove fill indicator cap. An “E” is visible

when dispenser is empty.

To fill dispenser:

The rinse agent dispenser holds 6 ounces

(175 ml). Under normal conditions, this

lasts about 3 months.

1.

Open dishwasher door completely.

2. Remove fill indicator cap.

3. Add rinse agent. Fill to smallest opening

in lower part of dispenser only. Overfilling

may cause rinse agent to leak out. This

will not harm the dishwasher, but could

cause oversudsing.

4. Clean up any spilled rinse agent with a

damp cloth.

5. Replace fill indicator cap. Keep it closed

tightly.

NOTE:

You do not have to wait until the

dispenser is empty before refilling, but do

not overfill it. Your dishwasher is designed

to use a liquid rinse agent. You do not need

to use a solid or bar-type rinse agent.

Cap center clear

“E” vlslble

when empty

when empty

Keep dispenser fllled for best drylng results

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Comments to this Manuals

No comments