GB
-1-
Chart
START
DELAY
option
ON/OFF
BUTTON
PROGRAM
SELECTOR
KNOB
(see “Table of
programs”
below).
START BUTTON
The indicator lights up during operation, flashes when a fault occurs, and goes off
at the end of the program.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected program and options will be
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be
cancelled by RESETTING. Detailed instructions are given in chapter “What to do if...”.
(see at right for options description)
MULTI
ZONE
option
POWER
CLEAN
option
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional
options) and may vary depending on conditions. Differences of up to 20 minutes are possible with sensor programs as a result of th
appliance’s automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on th
EN/Standard loading comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.
3) The antibacterial action has been tested by the Institut Pasteur of Lille (France), based on the NF EN 13697 standard of November 2001.
Table of programs
Deter-
gent
Consumption
P
Programs
Available
options
Loading instructions
Litres kWh
Minutes
1)
1
Auto Sensor 50-65°C
Delay
Multizone
Power Clean
Recommended program for routine washes, with
dried-on food (e.g. EN 50242).
X 11-16 1.10-1.50 100-130
2
Pre-Wash cold
Delay
Multizone
Crockery to be washed later. — 4.0 0.03 14
3
Quickwash 45°C
Delay
Multizone
Lightly soiled crockery, with no dried-on food.
* Use of tablets not recommended.
X
*
11.0 0.80 30
4
Bio Normal
2)
50°C
Delay
Multizone
Power Clean
Normally soiled crockery.
Energy-saving program.
X 12.0 1.05 165
5
Hygienic +
3)
Delay
Multizone
Normally or heavily soiled crockery, with
additional antibacterial wash. Program
interruption (e.g. due to door opening) can
compromise elimination of germs.
X 13.0 1.50 115
6
Intensive 70°C
Delay
Multizone
Power Clean
Recommended program for heavily soiled
crockery, especially suitable for pots and pans.
X 14.0 1.55 155
5019 496 01655GSI Primeline 9617
DELAYED START
BUTTON
Press the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to 24
hours. With each press of
the button, the delayed
start indicator increases by
one hour and after 24
restarts from 00. Then
press the START button.
The dishwasher will start
after the set time.
RINSE AID INDICATOR
When lit, the rinse aid dispenser
needs to be refilled.
SALT INDICATOR
When lit, the salt reservoir
needs to be refilled.
FAULT INDICATION AND WASH TIME DISPLAY
In normal operation it indicates the remaining time
(h:mm), whereas with “Delayed start” selected it
indicates the time remaining until program start (hh).
If “F..” appears on the display, see chapter “What to do if...”.
Options and display description
BEFORE USING THE APPLIANCE FOR THE
FIRST TIME CAREFULLY READ THIS QUICK
REFERENCE GUIDE AND THE ASSEMBLY
INSTRUCTIONS! THE GUARANTEE IS NOT
APPLICABLE IF FAULTS ARE CAUSED BY
INCORRECT USE OF THE APPLIANCE.
HALF LOAD/
MULTIZONE
Allows you to choose the
washing zones. Press this
button to select the wash
zones:
both racks
only upper rack
only lower rack
POWER CLEAN
Thanks to the additional
power jets this option
provides a more intensive
and powerful wash in the
lower rack, in the specific
area.This option is
recommended for washing
pots and casseroles
(see
page 4). Press this button
to activate Power Clean
(the indicator lights up).
Quick reference guide
Comments to this Manuals