Whirlpool LL 42 AG Instruction for Use download pdf (Page 23)

ARISTON DISHWASHER - Instructions for installation and use

21

D

ISHWASHER

Cleaning and special maintenance

Cleaning the sprayer

arms.

Food residue may become

encrusted onto the sprayer arms

and block the holes where water

comes out. Check the sprayer arms

regularly and clean them once in a

while (letters F and I Close-up

view).

Once in a while,

once a month,

spend a little time

on the filter

assembly and the

sprayer arms.

Keep your dishwasher in shape

Respecting these few rules ensures you will always

have a reliable work companion by your side.

After every wash.

When the wash cycle has ended,

always remember to turn off the

water supply tap and to leave the

appliance door ajar. This way,

moisture and bad odours will not

be trapped inside.

Unplug the appliance.

Before carrying out any cleaning

or maintenance on the dishwasher,

always remove the plug from the

electricity socket. Do not run risks.

No solvents! No abrasives!

To clean the exterior and rubber

parts of your appliance, do not use

solvents or abrasive cleaning

products. Use a cloth dampened

with lukewarm soapy water only.

If there are any stains on the

surface of the appliance interior,

use a cloth dampened with water

and a little white vinegar, or a

cleaning product specifically made

for dishwashers.

Going on holiday?

When you go away for an extended

period of time, we recommend you

do the following:

 run a cycle with the dishwasher

empty

 turn off the water inlet tap.

 leave the appliance door ajar

This will help the seals last longer

and prevent unpleasant odours

from forming inside the appliance.

Moving the appliance.

Should the appliance have to be

moved, try to keep it in a vertical

position. If absolutely necessary, it

can be positioned on its back.

The seals.

One of the factors that cause

unpleasant odours to form inside

the dishwasher is food that remains

trapped in the seals. Periodic

cleaning using a damp sponge will

prevent this from occurring.

Your dishwasher is not a waste

disintegrator!

Do not worry about removing every

single bit of food residue from your

dishes, but do get rid of bones, peel and

rind and any other left-overs before

placing them in the racks. Empty out

all glasses and cups.

Care and maintenance

1

2

A

B

C

The filter assembly

If you want consistent good results

from your dishwasher, you need to

clean the filter assembly.

The food particles are removed

from the wash water, allowing it to

be recirculated during the cycle,

filtered perfectly. For this reason,

it is a good idea to remove the larger

food particles trapped inside the

cup C and the semi-circular filter

A after each wash; pull the cup

handle upwards to remove them.

Just rinse them under running

water.

The entire filter assembly should

be cleaned thoroughly once a

month: cup C + semi-circular filter

A + cylindrical filter B. Rotate filter

B anticlockwise to remove it.

For cleaning, use a non metallic

brush.

Reassemble the filter parts (as

shown in the figure) and reinsert

the whole assembly into the

dishwasher. Position it into its

housing and press downwards.

The dishwasher is not to be used

without filters. Improper

replacement of the filters may re-

duce the efficiency of the wash and

even damage your dishwasher.

1 ... 22 23 24 ... 48

Comments to this Manuals

No comments