Whirlpool F084088 Instruction for Use download pdf (Page 5)

hotpoint.co.uk

OPERATION OF YOUR KETTLE

Usethekettleonlywithitsincludedbase.

1. To ll the kettle, remove it from the power

base and open the lid by pressing the lid

openingbutton,llwiththedesiredamount

ofwater,andthenclosethelid.Alternatively,

the kettle may be lled through the spout.

The water level should not exceed the

max marks or sit below the min level. Too

little water will cause the kettle to switch off

beforethewaterhasboiled.

The max capacity of the kettle is 1.7L.

Do not add water over the maximum

level, as it may spill out of the spout when

boiling. Ensure that the lid is rmly in place

before connecting the plug into a power outlet.

2. Positionthekettleonthepowerbase.

3. Connect the plug into a power outlet.

4. Pressthetemperaturesettingbuttontoset

the temperature to 50, 60, 70, 80, 90 or 100

°C.

5. When the water has reached the selected

temperature, the kettle will switch off

automatically, the display will show the

temperatureandabuzzerwillsound.

6. If the temperature cannot be set, this

means that the water in the kettle is hotter

than the desired temperature. The current

temperature will light up. You can turn off

thekettleatanytimebypressingthecancel

button.

The selected temperature can be

changed at any time while the kettle is

heating up. While the kettle is heating up, the

current temperature lights up.

Be careful when pouring the water from

your kettle as boiling water may cause

scalds. Open the lid carefully while the water

in the kettle is hot.

Below 45° C, the kettle automatically

shuts down and goes into “standby”

mode.

If the container is removed and re-introduced

before the heating process is over, the

settings stay active for a few minutes. Then

the appliance enters into stand-by mode.

Press any button to start it again.

KEEP-WARM FUNCTION

Thisfunctionmakesitpossibletokeepthewater

at the set temperature.

You can turn it on with any temperature setting.

Pressthekeep-warmbuttonandalightwillshow

thatthefunctionisactive.Toturnifoff,pressthe

buttonagain.Thekeep-warmindicatorgoesoff.

The keep-warm feature switches off

automatically after 1 hour.

PRE-BOIL FUNCTION

Thisfunctionmakesitpossibletobringthewater

totheboilregardlessofthesettemperature.Press

thePre-Boilbuttontostartit.Theapplianceheats

thewateruptotheboilingpointandstaysactive

for 2 minutes. Then the temperature decreases to

thesetvalueandabuzzersounds.

BOIL-DRY PROTECTION

Should you accidentally let the kettle operate

without water, the boil-dry protection will

automatically switch off the power. If this occurs,

allow the kettle to cool down before lling with

cold water.

CLEANING AND

MAINTENANCE

Always disconnect the appliance from the power

outletbeforecleaning.

1. Never immerse the kettle, power cord

or power base in water and never allow

moisture to get in contact with these parts.

2. Wipe the outside of the body with a damp

clothorcleaner.Neveruseatoxiccleaner.

3. Remember to clean the lter on a regular

basis. For easier cleaning, detach the lter

bypressingitdowndirectly.Thenreplaceit

after cleaning.

Do not use chemical, steel, wooden or

abrasive cleaners or brushes to clean

the outside of the kettle to prevent any gloss

loss.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Whirlpool F084088 Instruction for Use Page 5

Comments to this Manuals

Related products and manuals for Electric kettles Whirlpool F084088