Whirlpool WHE3933 Instruction for Use Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
This appliance must not be used by children under
8 years of age, or by people with limited physical,
sensory or mental abilities or without experience
and knowledge of it, unless instructed in its use by
those responsible for their safety.
Do not allow children to play or hide inside the
product: risk of becoming trapped inside and
suocating.
Power cable modication or replacement must only
be carried out by qualied personnel or After-sales
Service.
Do not use extension leads or adapters.
Electrical disconnection must be possible either by
unplugging the appliance or by means of a double-
pole switch located upline from the socket.
Ensure that the voltage indicated on the appliance
data plate corresponds to the domestic supply
voltage.
Do not ingest the contents (non-toxic) of the ice
packs (if provided).
Restrict the number of times you open the door.
This appliance features “skin condenser”
technology: the condensing unit is integrated into
the walls of the freezer. For this reason the side and
front walls of the product may become hot while
the product is running. This is entirely normal and
also reduces the risk of condensation forming in
particularly critical environmental conditions (see
paragraph “Troubleshooting guide”).
APPLIANCE DEFROSTING
The appliance should be defrosted when the thickness of
ice on the walls reaches 5-6 mm.
Disconnect the appliance from the power supply.
Remove food from the appliance and put it in a very cool
place or a thermally insulated bag.
Leave the appliance door open.
Remove the internal defrost water drain plug (depending
on model) (Fig. 8).
Remove the external defrost water drain plug (depending
on model) and reposition it as shown in Fig. 8.
Use the separator (depending on model) inside the
product as a recipient for any remaining water, (D) as
shown in Fig. 8. If there is no separator, use a shallow
container.
Defrosting can be sped up by using a spatula to detach
the frost from the appliance walls.
Remove the frost from the bottom of the appliance.
In order to avoid permanent damage to the
appliance interior, do not use pointed or sharp
metal instruments to remove the ice.
Do not use abrasive products or heat up the interior
articially.
Dry the inside of the appliance thoroughly.
Ret the plug after defrosting.
CLEANING AND MAINTENANCE
Remove the frost from the upper edges (see
Troubleshooting Guide).
Clean the inside after defrosting, using a sponge
dampened with warm water and/or mild detergent.
Clean the side vent (if provided).
Unplug the appliance before carrying out maintenance
operations. Do not use abrasive products, scourers
or stain-removers (e.g. acetone, trichloroethylene) to
clean the appliance.
To obtain the best results from your appliance, carry
out cleaning and maintenance at least once a year.
CHANGING THE LID LIGHT BULB (if provided)
Disconnect the appliance from the mains power supply.
Remove the diuser by following the sequence of steps
shown in the gure.
Unscrew the light bulb and replace it with an identical
bulb of the same wattage and voltage.
Ret the diuser and plug in the appliance.
TROUBLESHOOTING GUIDE
1. The red LED ashes.
Is there a power failure?
Is a defrosting operation in progress?
Has fresh food recently been introduced?
Is the appliance lid properly closed?
Is the appliance placed near a heat source?
Are the ventilation grille and condenser clean?
2. All LEDs ash at the same time.
Contact the After-Sales Service.
3. The appliance is too noisy.
Is the appliance perfectly horizontal?
Is the appliance in contact with other furniture or
objects that may cause vibrations?
Has the packaging been removed from under the
appliance?
Note: Gurgling noises from the refrigerating circuit after the
compressor cuts out are perfectly normal.
4. All LEDs are o and the product is not working.
Is there a power failure?
Is the plug properly inserted in the socket?
Is the electric cable intact?
5. All LEDs are o and the product is working.
Contact the After-Sales Service.
6. The compressor runs continuously.
Have hot foods been put in the appliance?
Has the appliance lid been left open for a long time?
Is the appliance placed in a very warm room or near
heat sources?
Has the fast freeze function been activated? (the
green LEDS ash alternatively)
7. Too much ice on the upper edge.
Are the defrost water drainage plugs correctly
positioned?
Is the appliance lid properly closed?
Is the appliance lid seal damaged or deformed?
(See chapter “Installation”)
Have the 4 protection pieces been removed?
(See chapter “Installation”)
8. Formation of condensate on the external walls of
the appliance.
It is normal for condensation to form under certain
atmospheric conditions (humidity above 85%) or if the
appliance is located in a damp or poorly ventilated
room. The performance of the appliance is in no way
aected.
9. The layer of ice on the internal walls of the
appliance is not uniform.
This phenomenon is quite normal.
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments