Whirlpool ARC 4020 WH Instruction for Use Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
82
TROUBLESHOOTING GUIDE
1. The appliance is not working.
Is there a power failure?
Is the plug properly inserted in the socket?
Is the double-pole switch on?
Has the fuse blown?
Is the power cord in perfect condition?
2. Temperature inside the compartments is not
low enough.
Are the doors closed properly?
Is the appliance installed near a heat source?
Is the thermostat setting correct?
Are the air circulation grilles blocked?
Is the condenser clean?
3. Temperature inside the refrigerator
compartment is too low.
Is the thermostat setting correct?
4. The appliance is excessively noisy.
Is the appliance in contact with other
furniture or objects?
Are the pipes at the back touching or
vibrating?
5. The inside light is not working.
Perform the checks for problem 1, and then:
Remove the shelf to allow access.
Use a screwdriver to prise off the transparent
bulb cover.
Unscrew the bulb and replace it with one of
the same type (max. 15 Watt), available from
our After-sales Service.
Refit the cover by pushing it gently into
place.
6. The acoustic alarm is activated and the
Door open LED blinks.
The door has been left open for too long:
Close the door. Press the Alarm mute button
if you need to leave the door open for a
prolonged period of time.
7. The acoustic alarm is activated and all the
LEDs blink.
The door has been left open for too long:
Close the door.
Refrigerator component malfunction:
Press the Alarm mute button to deactivate
the acoustic alarm. Contact the After-sales
Service.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.
See if you can solve the problem yourself with
the help of the Troubleshooting guide.
2.
Switch the appliance on again to see if the
problem has been solved. If it has not,
disconnect the appliance from the power supply
and wait for about an hour before switching on
again.
3.
If the problem persists after this course of
action, contact After-sales Service.
Specify:
the nature of the problem,
the model,
the Service number (the number after the word
SERVICE on the data plate on the inside of the
appliance),
your full address,
your telephone number and area code.
Note:
The direction of door opening can be changed. If
this operation is performed by After-sales
Service it is not covered by the warranty.
3gb33007.fm Page 82 Tuesday, November 19, 2002 3:58 PM
Page view 8
1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments