Whirlpool ARC 6700/IX Instruction for Use Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
146
Vacation
This function turns the refrigerator compartment to a warmer state if you are going away for some time.
To select the function, keep pressing the menu button until the display shows the vacation symbol .
Press OK to confirm. To turn the refrigerator back to setting point repeat this procedure.
Important:
after activating this function, remove all perishable foodstuffs from the refrigerator
compartment and leave the door closed, since the refrigerator maintains a suitable temperature to
prevent the formation of unpleasant odours.
Party mode
To select the function, keep pressing the menu button until the display shows the party mode symbol .
The symbol flashes, press OK to confirm. Use this function to chill drinks inside the freezer compartment.
When the function is in operation, the symbol is animated. 30 minutes after selection (the time
required to chill a 0.75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm
sounds and the display lights up: remove the bottle from the freezer compartment and press and
hold the OK button to disable the function.
Important
: do not leave the bottle inside the freezer compartment longer than the time necessary
for chilling.
Control panel lock function
This function prevents anyone from inadvertently changing settings or switching off the appliance.
To lock the control panel, press buttons “+” - “OK” - “-” at the same time for 3 seconds until the
display shows the symbol : an acoustic signal confirms the function has been selected.
To disable the function, follow the same procedure until the symbol switches off.
ON/OFF
This function turns off both the refrigerator and freezer compartments.
To enable the stand-by function, press the “on-off” button for 3 seconds, two hyphens appear on
both display to indicate that the appliance is on stand-by.
To switch the appliance on again, follow the same procedure until the previously set temperature is
shown on the display.
When the appliance is on stand-by the light inside the refrigerator compartment does not work.
Remember that this operation does not disconnect the appliance from the power supply.
Fridge Stand-by
This function turn off the fridge compartment while the freezer compartment continue to run.
To enable the stand-by function, press the “Fridge stand-by” button for 3 seconds. To switch the fridge
compartment on again, follow the same procedure until the previously set temperature is shown on the
display. When the fridge compartment is on stand-by the light inside the refrigerator compartment does
not work.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments