Whirlpool 12828188A Specifications download pdf (Page 9)

The control center is located on the front of the ice and water

dispenser.

Temperature Controls

For your convenience, your temperature controls are preset at the

factory. When you first install your refrigerator, make sure the

controls are still set to the recommended set points as shown.

Recommended Settings

To Adjust Set Point Temperatures:

The first touch of the (+) or (-) touch pad displays the current

temperature set point.

• Press the (+) or (-) touch pads until the desired temperature

set point is displayed.

NOTE: Except when first turning on the refrigerator, do not

adjust either temperature control more than one setting at a

time. Wait 24 hours between adjustments for the temperature

to stabilize.

IM PORTANT:

• When the power is on, the temperature display shows the set

point temperature of the compartment.

Wait 24 hours for your refrigerator to cool completely before

adding food. If you add food before the refrigerator has cooled

completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature

controls to a colder than recommended setting will not cool

the compartments any faster.

The recommended settings should be correct for normal

household refrigerator use. The controls are set correctly

when milk or juice is as cold as you like and when ice cream is

firm.

If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not

blocked before adjusting the controls.

Cooling On/Off:

• Cooling On/Off turns off cooling for both compartments. It

does not disconnect power to the refrigerator.

• Press and hold Cooling On/Off for 3 seconds. The LED will

light up to indicate that cooling is Off. Press the button again

to turn on the cooling. The LED will turn off.

Reffgerat0n

C001i_gOff

P_ss] Sec

Adjusting Controls

The REFRIGERATOR control adjusts the refrigerator compartment

temperature. The FREEZER control adjusts the freezer

compartment temperature.

If you need to adjust the temperature in either the refrigerator or

freezer compartment, use the settings listed in the chart as a

guide.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm REFRIGERATOR Control

1o lower

FREEZER too warm/too little ice FREEZER Control 1o

lower

REFRIGERATOR too cold REFRIGERATOR Control

1o higher

FREEZER too cold FREEZER Control 1°

higher

Additional Control Center Features

Fast Cool

The Fast Cool feature assists with periods of high refrigerator use,

full grocery loads, or temporarily warm room temperatures.

• Press the Fast Cool touch pad to set the freezer and

refrigerator to the lowest temperature settings. Press the Fast

Cool touch pad again to return to the normal refrigerator set

point.

NOTE: The Fast Cool feature will automatically shut off in

approximately 2 hours. When Fast Cool is on, the temperature

cannot be adjusted.

FAST COOL

Humidity Control

The humidity control feature turns on a heater to help reduce

moisture on the door hinge seal. Use in humid environments or

when you notice moisture on the door hinge seal. The refrigerator

uses more energy when Humidity Control is on.

• Press Humidity Control to turn on the door heater. Press

Humidity Control again to turn off the heater. The LED will be

illuminated when Humidity Control is on.

©°

HUMIDITY CONTROL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments

Whirlpool 12828188A Specifications Page 9

Comments to this Manuals

Related products and manuals for Fridges Whirlpool 12828188A