Whirlpool 5GI6FARAF Instruction for Use download pdf (Page 5)

IMPORTANT: This refrigerator is designed for indoor, household

and similar applications such as:

■ Staff kitchen areas in shops, offices and other working

environments.

■ Farmhouses and by clients in hotels, motels and other

residential type environments.

■ Bed and breakfast type environments.

Ventilation

Install the refrigerator in a dry and well-ventilated place.

To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂"

(1.25 cm) of space on each side and at the top. Allow for a 1"

(2.54 cm) space behind the refrigerator. If your refrigerator has an

ice maker, allow extra space at the back for the water line

connections. When installing your refrigerator next to a fixed wall,

leave a 3³⁄₄" (9.5 cm) minimum space between the refrigerator and

wall to allow the door to swing open.

NOTE: Keep the refrigerator ventilation openings clear.

Temperature

This refrigerator is designed for operation in places where the

temperature comes within the following ranges, according to the

climatic class shown on the rating plate. The refrigerator may not

work properly if it is left for a long time at a temperature outside

the specified range.

NOTE: It is recommended that you do not install the refrigerator

near a heat source, such as an oven or radiator.

Handle Removal and Replacement

Measure the door opening and the depth and width of the

refrigerator. Remove handles or doors, if necessary.

Refrigerator Door Handles

IMPORTANT: To avoid scratching the finish, do not press the

handles into the refrigerator when replacing them.

To remove the handle:

1. Grasp the lower part of the handle firmly, slide the handle up

and pull the handle straight out from the door.

2. Repeat Step 1 to remove the handle from the adjacent door.

To replace the handle:

1. Position the handle so that the large holes in the mounting

clips are down and align the holes with the door studs.

2. Rotate the handle so that the mounting clips are flat against

the door and slide the handle down to engage.

Freezer Drawer Handle

To remove the handle:

1. Slide the handle to the left to disengage the slots in the

mounting clip from the drawer studs, and pull it off of the

drawer.

To replace the handle:

1. Position the handle so that the large holes in the mounting

clips are aligned with the door studs.

2. Rotate the handle so that the mounting clips are flat against

the drawer and slide the handle toward the right to engage.

Remove and Replace Doors and Hinges

IMPORTANT: Contact a qualified engineer to perform this task.

Climatic Class Amb. T. (°C) Amb. T. (°F)

SN From 10 to 32 From 50 to 90

N From 16 to 32 From 61 to 90

ST From 16 to 38 From 61 to 100

T From 16 to 43 From 61 to 110

3³⁄₄" (9.5 cm)

¹⁄₂" (1.25 cm)

1 2 3 4 5 6 7 8 9 10 ... 295 296

Comments to this Manuals

No comments

Whirlpool 5GI6FARAF Instruction for Use Page 5

Comments to this Manuals

Related products and manuals for Fridges Whirlpool 5GI6FARAF