Whirlpool ARG 090/G/WP Instruction for Use download pdf (Page 6)

N C

M Y

INSTALLATION

x Do not install the refrigerator close to any

heat source.

x Place it in a dry and well ventilated space.

x Make sure that the appliance is well levelled.

x Never cover the plinth. You must leave at

least a 50 mm gap, if the appliance is installed

under a kitchen furniture.

x Let the appliance to stand for 1 hour prior to

connecting it to the electricity supply.

Electrical connection

x Check that the voltage on the rating plate

corresponds to the voltage in your home.

x The earthing of the refrigerator is

compulsory by law.

The Manufacturer will accept no liability

for damage to persons or to objects

arising from the non-observance of this

requirement.

x If the plug and the wall socket do not comply,

have the socket replaced by a qualified

technician.

x Do not use adapters, multipole sockets or

extension cords.

Door reversibility

X

1.

Tilt the appliance backwards and remove the

lower right hinge.

X

2.

Remove the door from the pin of the top

hinge.

X

3.

Remove the screw cover, the screws and the

top right hinge.

4.

Remove the 3 clips covering the holes of the

left screws.

5.

Fix the hinge to the top left hand side, using

thesamescrewstotightenit.

6.

Reposition the clips and the screws cover in

the new relevant holes.

7.

Fit the door in the pin of the top hinge.

8. Mount the lower hinge on the left hand side

and the foot on the right hand side using t he

same screws in the holes already provided

on the appliance.

X

1

X

2

X

3

12

12

1 2 3 4 5 6 7

Comments to this Manuals

No comments