Whirlpool ART 843-2/G Instruction for Use download pdf (Page 10)

21

TROUBLE-SHOOTING GUIDE

AFTER-SALE SERVICE

1. The temperature in the compartments is

not cold enough

• Is the food preventing doors from closing

properly?

• Is the appliance too close to a heat source?

• Is the thermostat on the correct setting?

• Is the condenser clean?

• Is air circulation blocked?

2. The temperature in the refrigerator

compartment is too cold

• Is the thermostat on the correct setting?

3. The appliance is excessively noisy

• Does the appliance touch other furniture or

objects?

• Do the pipes on the back touch and rattle?

• Is there anything on top of the appliance?

• Has the compressor fixing block been

removed?

4. The appliance does not work

• Is there a power failure?

• Is the plug properly inserted in the socket?

• Has the fuse blown?

• Is the power cable broken?

• Is button 1 pressed? (if available)

5. The inside light does not work

First check point 4 then:

• Unplug the appliance.

• Remove the light shield. Check the bulb.

Do not unscrew the bulb but pull it out

towards the inside of the appliance and replace

it if necessary. It must not exceed 15 W.

6. The door gasket is warm

• It is not a problem: it prevents condensation.

For Great Britain only

Check that the plug fuse is well fitted. A 13 A

fuse must be used.

Check removable plugs for loose connections

and tighten them if necessary.

Loose connections can overheat the plug.

Before calling for Service:

1. Carefully check the Trouble-Shooting Guide

to see if you can fix the problem yourself.

2. Re-start the appliance and check if the

problem has cleared itself.

If both attempts fail, please call for Service.

Note: Door swing change, if carried out by the

After-Sale Service, is not covered by the

warranty.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments