Whirlpool DESIGNERSTYLE 2184589 Troubleshooting Guide download pdf (Page 9)

To remove the shelf:

1. Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lift front of shelf to 45” angle.

4. Lower shelf slightly to release shelf from upper

channel of track. Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both hands

when removing shelf.

Hold with both hands and lift front to 45” angle.

To remove shelf track:

1. Lift both sides of track slightly.

2. Pull track straight out.

To replace shelf track:

1. Guide track hooks into the shelf support slots on the

back wall of the cabinet.

NOTE: Make sure both track hooks are in slots and

that the slots are parallel to each other.

2. Push track backward and down.

3. Check that track is completely seated in the shelf

supports.

To reinstall shelf:

1. Hold shelf at front and back.

2. Tilt front of shelf up to a 45” angle to track.

3. Insert both rear shelf slides into upper channel

of track.

4. Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely in

the track before letting go of shelf.

Uppyr channel

Hold both sides and lift up and out.

47 \

Make sure

both sets

of hooks

are in

support

slots.

KY I”

Shelf

’ support

Upper channel

Insert rear shelf

slides into

upper channel

of track.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Comments to this Manuals

No comments

Whirlpool DESIGNERSTYLE 2184589 Troubleshooting Guide Page 9

Comments to this Manuals

Related products and manuals for Fridges Whirlpool DESIGNERSTYLE 2184589