Whirlpool DPA 33 Instruction for Use download pdf (Page 7)

CARE AND MAINTENANCE

• Periodically clean air vents and the condenser at the rear

of the appliance with a vacuum cleaner or a brush.

• Clean the outside using a soft cloth.

Prolonged disuse

1. Empty the refrigerator.

2. Disconnect the appliance from the power supply.

3. Defrost and clean the interior.

4. In the event of prolonged disuse, leave the door open to

prevent the formation of mould, odours and oxidation.

5. Clean the appliance.

• Clean the inside of the low temperature compartment

(where fitted) when defrosting.

• Periodically clean the inside of the refrigerator

compartment with a sponge dampened in warm water

and/or neutral detergent. Rinse and dry with a soft cloth.

Do not use abrasive products.

• Clean the outside with a soft damp cloth.

Do not use abrasive products, scourers, stain-removers

(e.g. acetone, trichloroethylene) or vinegar.

Replacing bulbs:

When replacing the bulb, proceed as follows:

• Unplug the appliance from the mains

• Squeeze the tabs on the sides of the lamp cover and

remove it.

• Replace the bulb with a new one, maximum 15 W.

• Put the lamp cover back on and wait 5 minutes before

plugging the appliance back into the mains.

63602072GB.fm Page 21 Wednesday, September 23, 2009 4:42 PM

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Whirlpool DPA 33 Instruction for Use Page 7