Whirlpool EL02CCXPB00 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
6. Use the socket wrench and ⁵⁄₁₆" screws to install the bottom
hinge on the opposite side of the refrigerator.
NOTE: Do not tighten the screws completely.
7. Stand the refrigerator upright.
Replace the Door
1. Replace the door on the bottom hinge pin.
2. Tighten the bottom hinge screws the rest of the way.
3. While holding the door in the closed position, install the ⁵⁄₁₆"
screws in the top hinge on the side opposite its original
location.
NOTE: Do not tighten the screws completely.
4. Be sure that the door is level with the top of the refrigerator.
Then tighten the screws the rest of the way.
5. Replace the hinge cover.
6. Adjust the leveling legs to level the refrigerator. See Adjust
the Door Closing.
7. Plug in refrigerator or reconnect power.
Adjust the Door Closing
Your refrigerator has two adjustable leveling legs in the front. If
your refrigerator seems unsteady or you want the door to close
easier, adjust the refrigerator's tilt using these instructions.
1. Move the refrigerator into its final location.
2. Lower the leveling legs just enough to lift the cabinet up and
off of the floor.
3. Adjust the leveling legs to level the refrigerator:
Turn the leveling leg to the right to lower that side of the
refrigerator.
Turn the leveling leg to the left to raise that side of the
refrigerator.
4. Check with a level.
5. Open and close the door to make sure that it closes as easily
as you like.
REFRIGERATOR USE
Using the Control
The refrigerator control is located on the inside of your refrigerator.
For your convenience, your refrigerator control is preset at the
factory. When you first install your refrigerator, make sure that the
control is still preset to the mid-setting as shown.
NOTE: To turn your refrigerator off, turn the refrigerator control
to 0. Your product will not cool when the refrigerator control is set
to 0.
A. Bottom hinge pin
B. Leveling leg
C. Bottom hinge
D.
⁵⁄₁₆
" screws
A.
⁵⁄₁₆
" screws
B. Top hinge
B
A
C
D
A
B
0
1
4
7
2
3
5
6
0
1
4
7
2
3
5
6
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments