Whirlpool Freezerator FREEZERATOR CONVERTIBLE REFRIGERATOR/FREEZER Use and Care Guide download pdf (Page 8)

7. Remove the casters and fasteners from the box.

8. Locate and remove the caster brackets from the FeaturePak.

9. Using ⁵⁄₁₆ –18 x ⁷⁄₈" hex-head bolts, attach one rigid caster and

one swivel caster to each caster bracket. The rigid caster fits the

front of the bracket and the swivel caster fits on the rear.

10. Insert the hex-head bolts from the bottom and start the self-

locking nuts for each caster.

11. Hold the head of the hex-head bolts with a wrench while

tightening the self-locking nuts with a socket wrench.

12. Using a ¹⁄₂" socket wrench, remove the four unit bolts (two on

each side) from the lower front and rear of the convertible

refrigerator/freezer.

NOTE: Do not remove leveling bolt.

Lower Front Corner

13. Place the slot in the rear of the caster bracket over the hole in the

rear of the convertible refrigerator/freezer. Align the hole in the

front of the caster bracket with the hole in the front of the

convertible refrigerator/freezer.

Lower Rear Corner

14. Hold the bracket in place and insert the unit bolts into the front

and rear unit holes and tighten.

NOTE: Do not overtighten the bolts.

15. Insert two of the ¹⁄₄–20 x 1¹⁄₄" self-tapping hex-head bolts and

lock washers into the two holes in the side of the caster bracket.

Push the caster bracket against the bottom of the convertible

refrigerator/freezer and tighten the bolts using a ³⁄₈" socket

wrench.

16. Repeat steps 12 to 15 for the second caster bracket.

Complete the Assembly

1. Lock the front caster wheels.

2. Insert a small piece of cardboard between the caster brake and

the floor. This will help prevent the brake from rubbing on the

floor.

3. Stand the convertible refrigerator/freezer upright.

4. Replace the base grille by placing the metal clips in the openings

in the metal panel and rolling the grille downward until it snaps

into place.

5. Unlock the wheels and move the convertible refrigerator/freezer

into its desired location.

A. Self-locking nut

B. Caster bracket

⁵⁄₁₆

–18 x

⁷⁄₈

" Hex-head bolt

D. Caster

Leveling bolt (do not remove)

B. Unit bolt

A. Rear unit hole

B. Caster bracket

A. Caster bracket holes

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Comments to this Manuals

No comments

Whirlpool Freezerator FREEZERATOR CONVERTIBLE REFRIGERATOR/FREEZER Use and Care Guide Page 8

Comments to this Manuals

Related products and manuals for Fridges Whirlpool Freezerator FREEZERATOR CONVERTIBLE REFRIGERATOR/FREEZER