Whirlpool IB 7030 F TW Instruction for Use download pdf (Page 4)

replace any part of the appliance unless specically

stated in the user manual. Keep children away from

the installation site. After unpacking the appliance,

make sure that it has not been damaged during

transport. In the event of problems, contact the

dealer or your nearest Aftersales Service. Once

installed, packaging waste (plastic, styrofoam parts

etc.) must be stored out of reach of children - risk of

suocation. The appliance must be disconnected

from the power supply before any installation

operation - risk of electric shock. During installation,

make sure the appliance does not damage the

power cable - risk of re or electric shock. Only

activate the appliance when the installation has

been completed.

Be careful not to damage the oors (e.g. parquet)

when moving the appliance. Install the appliance

on a oor or support strong enough to take its

weight and in a place suitable for its size and use.

Make sure the appliance is not near a heat source

and that the four feet are stable and resting on the

oor, adjusting them as required, and check that

the appliance is perfectly level using a spirit level.

Wait at least two hours before switching the

appliance on, to ensure that the refrigerant circuit is

fully ecient.

All dimensions and spacing needed for installation

of the appliance are in the Installation Instruction

booklet.

WARNING: When positioning the appliance,

ensure the supply cord is not trapped or damaged.

WARNING: To avoid a hazard due to instability,

positioning or xing of the appliance must be done

in accordance with the manufacturer instructions.

It's forbidden to place the refrigerator in such way

that the metal hose of gas stove, metal gas or water

pipes, or electrical wires are in contact with the

refrigerator back wall (condenser coil).

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance

from the power supply by unplugging it if plug is

accessible, or by a multi-pole switch installed

upstream of the socket in accordance with the

wiring rules and the appliance must be earthed in

conformity with national electrical safety standards.

Do not use extension leads, multiple sockets or

adapters. The electrical components must not be

accessible to the user after installation. Do not use

the appliance when you are wet or barefoot.

Do not operate this appliance if it has a damaged

power cable or plug, if it is not working properly, or

if it has been damaged or dropped.

If the supply cord is damaged, it must be

replaced with an identical one by the manufacturer,

its service agent or similarly qualied persons in

order to avoid a hazard - risk of electric shock.

WARNING: Do not locate multiple portable

socket-outlets or portable power supplies at the

rear of the appliance.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is switched

o and disconnected from the power supply before

performing any maintenance operation; never use

steam cleaning equipment - risk of electric shock.

Do not use abrasive or harsh cleaners such as

window sprays, scouring cleansers, ammable

uids, cleaning waxes, concentrated detergents,

bleaches or cleansers containing petroleum

products on plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or

other harsh cleaning tools.

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the

recycle symbol

The various parts of the packaging must therefore be disposed of

responsibly and in full compliance with local authority regulations

governing waste disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials.

Dispose of it in accordance with local waste disposal regulations.

For further information on the treatment, recovery and recycling

of household electrical appliances, contact your local authority,

the collection service for household waste or the store where you

purchased the appliance. This appliance is marked in compliance

with European Directive 2012/19/EU, Waste Electrical and Electronic

Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent

negative consequences for the environment and human health.

The symbol

on the product or on the accompanying documentation

indicates that it should not be treated as domestic waste but must be

taken to an appropriate collection centre for the recycling of electrical

and electronic equipment.

ENERGY SAVING TIPS

To guarantee adequate ventilation follow installation instructions.

Insucient ventilation at the back of the product increases energy

consumption and decreases cooling eciency.

Frequent door opening might cause an increase in Energy Consumption.

The internal temperature of the appliance and the Energy Consumption

may be aected also by the ambient temperature, as well as location

of the appliance. Temperature setting should take into consideration

these factors. Reduce door opening to a minimum.

When thawing frozen food, place it in the refrigerator. The low

temperature of the frozen products cools the food in the refrigerator.

Allow warm food and drinks to cool down before placing in the

appliance.

Positioning of the shelves in the refrigerator has no impact on the

ecient usage of energy. Food should be placed on the shelves in such

way to ensure proper air circulation (food should not touch each other

and distance between food and rear wall should be kept).

You can increase storage capacity of frozen food by removing baskets

and, if present, Stop Frost shelf.

Do not worry about noises coming from the compressor which are

normal operation noises.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Whirlpool IB 7030 F TW Instruction for Use Page 4

Comments to this Manuals

Related products and manuals for Fridges Whirlpool IB 7030 F TW