Whirlpool KRSM 9055 Instruction for Use download pdf (Page 7)

7

What to do if… Possible causes Solutions

It is not cold

enough inside the

compartments

There could be various causes

Check that:

• the doors close properly.

• the appliance is not near a heat source.

• the air ducts inside the compartments

are not blocked, as this prevents the

circulation of cold air.

• the "Vacation mode" function is not

enabled (see Quick Start Guide)

If necessary, lower the temperature.

The area in contact

with the seal is hot.

This is normal in hot weather and when

the compressor is running.

No action is required.

If the doors do not

open and close

properly.

The door seals may be dirty or sticky. Clean the seals.

The appliance may not be level.

If necessary, level the appliance (see

Installation manual).

The internal light is

not working.

The "Standby" function may have been

enabled (depending on the model).

Disable the function (see the Quick Start

Guide).

The bulb may be burnt out.

Replace the bulb (see Instructions for Use,

section "Maintenance and Cleaning").

The control panel

will not do anything:

every time a button

is pressed, the

acoustic signal

sounds.

The "Child Safety", "Key Lock" or

"Ice/water dispenser lock" function may

have been enabled.

Disable the function (see the Quick Start

Guide).

The "Compartment

door open" symbols

blinks and an

acoustic signal

sounds (if present)

Open door alarm.

The alarm is activated when the doors are

left open for more than 2 minutes.

Close the doors or press the mute alarm

button to switch off the acoustic signal.

There are letters on

the display, and an

acoustic signal is

sounding (if

provided and not

previously disabled).

Malfunction Alarm

The alarm indicates that a technical

component has malfunctioned.

Call an authorized After-Sales Service.

Press the mute alarm button to switch off

the acoustic signal.

The "Eco mode" function may have been

enabled.

Disable the function (see the Quick Start

Guide).

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments