Whirlpool W10326801A Use and Care Guide download pdf (Page 7)

Replace Door and Hinges

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge graphic. Replace the freezer door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge graphic. Do not tighten the screws completely.

3. Adjust the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Plug into a grounded 3 prong outlet.

2. Reset the control. See “Using the Control.”

3. Return all removable door parts to door and food to freezer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

A. Grommet

B. Handle

C. Setscrews

Handle

Door Removal & Replacement

Top Hinge

A. Top Hinge Cover

Hex-Head Hinge Screws

C. Top Hinge

Base Grille

Bottom Hinge

C. Hinge Pin

A. Door Stop Screws

B. Door Stop

Hex-Head Hinge Screws

D. Hinge Pin Nut

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Whirlpool W10326801A Use and Care Guide Page 7