Whirlpool ACQ142 User Manual download pdf (Page 5)

Cleaning the front panel

Screw

S&w

1. Unplug power cord.

2 Remove the front panel from unit for cleaning.

Remove two screws from bottom edge of front

panel.

3. Lift the front panel up and toward you.

4. Remove slide-out fifter and clean separately.

(See “Cleaning the filter” below.)

NOTE: Front does not have to be removed to

clean filter.

5. Clean front panel with warm water and mild

soap or detergent. Use a soft cloth. Rinse and

dry. Replace front panel.

6. Wipe control panel clean with a soft, dry cloth.

7. Plug in power cord.

Cleaning the filter

The filter is cleanable. A clean filter helps remove

dust, lint and other particles from the air. Check

every two weeks to see if filter needs cleaning.

1. Remove fifter by sliding the fifter up and out the

top of front panel.

2. Clean fiffer using a vacuum cleaner.

3. lf very dirty, wash filter with warm water and

mild detergent. Air dry thoroughly before

replacing.

4. Replace filter by sliding if back down into

opening at the fop of front panel.

Caring For Your Air Conditioner

Annual maintenance

Your air conditioner needs annual maintenance to

help ensure steady, fop performance throughout

the year.

Call the service company recommended by your

dealer to:

Inspect and clean the coils and condensate

water passages.

Check fan and fan motor.

The compressor and fan motor are sealed and

need no oiling. Expense of annual inspection is

customer’s responsibility.

If you are familiar with electrical appliances, you

can do the cleaning and maintenance yourself. If

you choose to do so, follow the steps on page

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Whirlpool ACQ142 User Manual Page 5

Comments to this Manuals

Related products and manuals for Hardware cooling accessories Whirlpool ACQ142