Whirlpool E6005 User Manual download pdf (Page 10)

The safety devices

Acoustic signal

Anomalies such as:

• an object (such as a saucepan or a lid, etc.) placed

for more than 10 seconds on the control zone,

• boiled-over liquids or food spilled on the control

zone,

• prolonged pressure on a key,...

could cause a beep to sound and the hob to turn off.

To stop the beep from sounding, remove the cause of the

malfunction.

To use the hob, turn it back on and re-select the cooking

zone(s) you wish to use. Set the desired heating power.

Safety cut out

Your appliance is fitted with a safety cut out which

intervenes after a certain amount of time (see table)

depending on the power setting. When the safety cut out

has intervened, the power display indicates “0”.

for example: the back right cooking zone is set to 5 and

the front left zone is set to 2. The back right zone will turn

off after 4 hours of operation and the front left zone will

turn off after 6 hours of operation.

To unlock the controls, turn the hob off by pressing the

key.

Overheating

Prolonged use of the hob could cause the electronic

components to overheat.

A thermal protection device momentarily sets a reduced

power (setting 3) on the front cooking zones until the

temperature has dropped back down to a suitable level.

Power level

Maximum operating

time in hours

1-2 6

3-4 5

6-7-8 1,5

91,5

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Whirlpool E6005 User Manual Page 10