Whirlpool ARZ 011/A+/5 Instruction for Use download pdf (Page 9)

1.The appliance is not working.

• Is there a power failure?

• Is the plug properly inserted in the socket?

• Is the main power switch on?

• Has the fuse blown?

• Is the power supply cable damaged?

• Is button (B) set to Stand-by?

2. Temperature inside the compartments is not low enough.

• Are the doors closed properly?

• Is the appliance installed near a heat source?

• Are the air circulation grilles blocked?

3. Water collects at the bottom of the refrigerator compartment.

• Is the defrost water drain blocked?

4. The inside light is not working.

Perform the checks for problem 1 and then:

• Disconnect the appliance from the mains power supply.

• If your appliance has a bulb, refer to the instructions and illustration on the attached product description

sheet for inspection and replacement

• If your appliance has led lights, contact the after-sales service.

5. Excessive frost build-up in the low temperature compartment.

• Is the low temperature compartment door closed properly?

6. The acoustic alarm sounds, the inside light is intermittent and the red led (G) flashes

• The door has been open for more than 2 minutes. Press button (F) to mute the alarm or close the

door.

7. The acoustic alarm sounds, the red led (G) and the letter “A” flash on the display

• Temperature sensor fault. Press button (F) to deactivate the alarm and contact the after-sales service

Note:

• If the alarm condition described at point 7 arises, the temperature setting button (C) and button (D)

cannot be used, but the appliance still maintains compartment temperatures that guarantee safe storage

conditions for food

• It is normal for the appliance to make a range of noises (gurgling and hissing due to expansion in the

refrigerant circuit ...) during the normal operating cycle.

TROUBLESHOOTING GUIDE

B A C

HG DEF

1 2 3 4 5 6 7 8 9 10 11

No comments

Whirlpool ARZ 011/A+/5 Instruction for Use Page 9