Whirlpool Maax Pearl Hot Tub User Manual download pdf (Page 13)

TROUBLE SHOOTING GUIDE

SYMPTOM CAUSE REMEDY

The whirlpool will not turn on. • No power to the pump. • Check the power to the GFCI

•Water level too low. circuit breaker for the pump.

• Add water until the level sensor

is covered as in fig. 9d on page 6.

The whirlpool has a Smart-Touch • The water level is too low. • Add water until the Pearl logo

control and LOW WATER flashes on the control illuminates.

on the digital display.

The pump surges. • The suction screen may be clogged. • Inspect suction screen for hair or

• The impeller may be clogged. other debris.

•Jet nozzle is pointing at return. • Adjust jet nozzle direction.

The pump comes on but does • Priming. • It takes about two or three

not move any water. minutes for the pump to prime.

The pump moves water but at • Air controls are not open. • Open air controls as desired.

low pressure or loud noise. • The suction screen is clogged. • Inspect suction screen for any

•Impeller is clogged on pump. debris, clean.

• Inspect pump for debris and clean.

The whirlpool system leaks. • Damage in shipping, or other • Contact Technical Service for

improper handling. help.

The bath water drains very slowly. • Bath waste plug is set too low. • Remove bath waste plug and

adjust the height by backing out

and tightening the lock nut as in

the set screw fig. 8 page 8.

The bath waste will not stay open • Contact Technical Service for

while draining. help.

The mood lights will not turn on. • No power to the lights. • Check the power to the GFCI

• Burned out or broken bulbs. circuit breaker for the lights.

• Remove the clear light cover and

replace bulbs. Refer to page 6

mood lights.

The in-line heater does not heat • No power to the heater. • Check the power to the GFCI

sufficiently. circuit breaker for the heater.

NOTE:IF ABOVE TROUBLE SHOOTING GUIDE IS INEFFECTIVE, CALL OUR TECHNICAL SERVICE AT

(800) 851-5375 OR (763) 424-3335. PLEASE HAVE THE FOLLOWING INFORMATION READY FOR

THE SERVICE TECHNICIAN:

• Name, address, and telephone number of the person we can contact to set up an appointment.

• The model and serial number of your whirlpool. You will find this information on the cover of the

Owners Manual.

• Have a complete description of the problem to aid the technician in his determination how best to

solve the problem.

REMEMBER: An in-line heater is designed to maintain water temperature, not to substitute for a water heater.

It is common for the heater indicator light to fluctuate on and off in normal operation.

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Whirlpool Maax Pearl Hot Tub User Manual Page 13

Comments to this Manuals

Related products and manuals for Kitchen Whirlpool Maax Pearl Hot Tub