Whirlpool MAX 24/ ALU Instruction for Use download pdf (Page 2)

2

INSTALLATION

PRIOR TO CONNECTING

Check that the voltage on the rating plate

corresponds to the voltage in your home.

Place the oven on a stable, even

surface that is strong enough to

hold the oven and the food

utensils you put in it. Use

care when handling.

Position the oven at a distance from other

heating sources. The cooling air, which is

taken in by the oven, must not exceed 35°C

temperature. For suﬃ cient ventilation there

must be a space of at least 8-cm above the

oven. Ensure that the space underneath,

above and around the oven is empty to allow

for proper airﬂ ow. The oven can operate in an

ambient temperature ranging from +5°C to

+35°C.

Ensure that the appliance is not damaged.

Check that the oven door closes ﬁ rmly against

the door support and that the internal door

seal is not damaged. Empty the oven and clean

the interior with a soft, damp cloth.

AFTER CONNECTING

The oven can be operated only if the oven

door is ﬁ rmly closed.

The earthing of this appliance is compulsory.

The manufacturer will accept no responsibility

for injury to persons, animals or damage to

objects arising from the non-observance of this

requirement.

The manufacturers are not liable for any

problems caused by the user’s failure to

observe these instructions.

Do not operate this appliance if it has

a damaged mains cord or plug, if it is not

working properly, or if it has been damaged

or dropped. Do not immerse the mains cord

or plug in water. Keep the cord away from hot

surfaces. Electrical shock, ﬁ re or other hazards

may result.

Do not remove the microwave inlet

protection plates located on the side of the

oven cavity wall. They prevent grease & food

particles from entering the microwave inlet

channels.

Poor television reception

and radio interference

may result if the oven

is located close to a TV,

radio or aerial.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments