Whirlpool AKP 450/IX Instruction for Use download pdf (Page 9)

EN9

Cleaning the rear wall and catalytic side panels of the oven (if present):

IMPORTANT: do not use corrosive or abrasive detergents, coarse brushes, pot scourers or oven sprays

which could damage the catalytic surface and ruin its self-cleaning properties.

• Operate the oven empty with the fan-assisted function at 200°C for about one hour.

• Next, leave the appliance to cool down before removing any food residue with a sponge.

MAINTENANCE

- Use protective gloves.

- Ensure the oven is cold before carrying out the following operations.

- Disconnect the appliance from the power supply.

REMOVING THE DOOR

To remove the door:

1. Open the door fully.

2. Lift the catches and push them forwards as far as they will go (g. 1).

3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (g. 2).

To ret the door:

1. Insert the hinges in their seats.

2. Open the door fully.

3. Lower the two catches.

4. Close the door.

Fig. 1 Fig. 2

MOVING THE TOP HEATING ELEMENT SOME MODELS ONLY

1. Remove the side accessory holder grilles (Fig. 3).

2. Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).

3. To reposition the heating element, lift it up, pulling it slightly towards you, be sure it comes to rest on the

lateral supports.

Fig. 3 Fig. 4 Fig. 5

WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Whirlpool AKP 450/IX Instruction for Use Page 9