EN 12
1.1 SETTING THE CLOCK
When the oven is switched ON for the rst time, the
clock must be set.
Set hours.
Conrm.
Set minutes.
Conrm.
NOTE: To change the time afterwards when the oven
is switched OFF, hold
for at least 1 second and
repeat the operations above. After a power failure the
clock needs to be re-set.
1.2 SETTINGS
If necessary the temperature units and electrical
power settings can be changed from the default
values (C° and 16A).
Hold for at least 5 seconds
when the oven is
switched OFF (see section 1.3).
Select C° or F°.
Conrm value.
Select power (16A or 13A).
Conrm value.
NOTE: After conrming settings, it may be necessary
to re-set the clock.
1.3 ON/OFF
When the appliance is turned o only the 24 hour
clock is displayed.
Switch the oven ON (hold for ½ sec).
When the oven is switched ON, both displays are
active.
The knob and all touch keys are fully functional.
NOTE: Always ends an active cooking cycle.
2 SELECTING A FUNCTION
In the left display, choose from 6 dierent cooking
cycles and 12 further functions. For descriptions, see
the table on page 17 and page 18.
Switch the oven ON.
Select the main function.
Conrm selection.
Proceed as indicated in the “quick start” section
(section 3), to run the cooking function
immediately or to go through the mode-setting
wizard as indicated in sections 4, 5, and 6.
NOTE: For
6
th
Sense or Special functions see
the relevant section (7, 8) on page 15.
USING THE OVEN
Comments to this Manuals