Whirlpool AKZM 784/WH Instruction for Use download pdf (Page 14)

EN12

BROWNING

At the end of cooking, with certain functions, the display indicates the possibility of browning. This

function can only be used when cooking time has been set.

At the end of cooking time, the display shows: “PRESS TO BROWN” . Press button , and the oven starts

a 5 minute browning cycle. This function can be selected consecutively a maximum of twice.

BREAD/PIZZA FUNCTION SELECTION

Turn the “Function” knob pointer to the symbol to access a submenu containing the automatic baking

functions for “bread” and “pizza”.

Bread

1. Turn the “Function” knob to the symbol : the display shows “BREAD” and AUTO alongside.

2. Press to select the function.

3. Turn the “Browse” knob to set the required temperature (between 180°C and 220°C) and confirm with

button .

4. Turn the “Browse” knob to set the required cooking duration and press to start cooking.

Pizza

1. Turn the Function knob to the symbol : the display shows “BREAD”. To select the “PIZZA” function,

proceed as follows:

2. Turn the “Browse” knob: “PIZZA” appears on the display.

3. Press to select the function.

4. Turn the “Browse” knob to set the required temperature (between 220°C and 250°C) and confirm with

button .

5. Turn the “Browse” knob to set the required cooking duration and press to start cooking.

MEAT PROBE (PROBE)

The meat probe supplied allows the exact temperature (up to 100°C) to be measured during cooking, to

ensure optimum cooking.

Based on the food being cooked, the required core temperature can be set.

It is very important to position the probe accurately in order to obtain perfect cooking results. Insert the

probe fully into the fleshiest part of the meat, avoiding bones and fatty parts (Fig. 1). For poultry, the probe

should be inserted sideways, in the middle of the breast, taking care to ensure the tip does not end up in a

hollow part (Fig. 2).

In the case of meat with very irregular thickness, check it is cooked properly before removing it from the

oven. Connect the end of the probe in the hole located on the right wall of the oven chamber.

Fig. 1 Fig. 2

1 ... 13 14 15 ... 25

No comments

Whirlpool AKZM 784/WH Instruction for Use Page 14