Whirlpool GBS307 Use and Care Guide download pdf (Page 5)

ELECTRONIC OVEN CONTROL

Display

When power is first supplied to the appliance, everything on both

displays will light up for 5 seconds. Then, the time of day and

“PF” will appear on the electronic oven display.

If “PF” appears at any other time, a power failure has occurred.

To reset the clock, press UPPER OFF/CANCEL or LOWER OFF/

CANCEL on double oven models. On single oven models, press

OFF/CANCEL.

Electronic Display

When the oven(s) are in use, this display shows the oven

temperature. On double oven models, this display will also show

which oven is being set. The left cavity symbol represents the

upper oven, and the right cavity symbol represents the lower

oven.

If “Err” appears on the oven display, an invalid pad was pressed.

Press UPPER OFF/CANCEL or LOWER OFF/CANCEL and retry

entry. On single oven models, press OFF/CANCEL.

When the oven(s) are not in use, the display will show the time

of day.

Start

The Start pad begins any oven function except the Timer. If the

Start pad is not pressed within 5 seconds after pressing a pad,

“START?” will appear on the oven display as a reminder. If the

Start pad is not pressed within 4 minutes after pressing a pad,

the oven display will return to the time of day mode and the

programmed function will be canceled.

Upper Off/Cancel, Lower Off/Cancel or Off/Cancel

The UPPER OFF/CANCEL, LOWER OFF/CANCEL and

OFF/CANCEL pads stop their respective oven functions except

for the Clock, Timer and Control Lock.

The cooling fan may continue to operate even after an oven

function has been canceled, depending on the oven temperature.

Clock

This is a 12-hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the ovens, Timer and Timed Cooking

are off.

1. Press CLOCK.

2. Press the HOUR or MIN “+” or “-” keypads to set the time of

day.

3. Press CLOCK or START.

To remove the time of day from the display: Press and hold

CLOCK for 5 seconds. Repeat to return the time of day to the

display. The time should not have to be reset.

Tones

Tones are audible signals, indicating the following:

One tone

■ Valid pad press

■ Oven is preheated

■ Function has been entered

Three tones

■ Invalid pad press

Four tones

■ End of cycle

■ Reminder, repeating each minute after the end-of-cycle tones

A. Auto clean

B. Upper oven temperature display

C. Electronic display

D. Lower oven temperature display

E. Timer

F. Clock

G. Oven light

H. Oven selector

I. Oven settings

J. Temperature setting

K. Timed cooking

L. Hour

M. Minute

N. Start (control lock)

O.Upper off/cancel

Lower off/cancel

IJ KL

1 2 3 4 5 6 ... 16

Comments to this Manuals

No comments

Whirlpool GBS307 Use and Care Guide Page 5

Comments to this Manuals

Related products and manuals for Ovens Whirlpool GBS307