5
EN
The function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time
will disable the oven preheating phase: The oven will
reach the temperature your require gradually, meaning
that cooking times will be slightly longer than those listed
in the cooking table. During the waiting time, you can
use the adjustment knob to amend the programmed end
time or press to change the settings.
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to confirm the time that cooking will end and
activate the function.
Please note: Once cooking has started, the display will
recommend the most suitable level for each function.
You can turn the selection knob to to pause the
function that has been activated at any time.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature:
At this point, open the door, place the food in the oven,
close the door and start cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result. Opening the door during the preheating phase will
stop pause it. The cooking time does not include a preheating
phase. You can always change the temperature you want the
oven to reach using the adjustment knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
Press to continue cooking in manual mode (without
a programmed cooking time) or turn the adjustment
knob to extend the cooking time by setting a new
duration. In both cases, the temperature or the grill
level settings will be retained.
BROWNING
Some functions of the oven enable you to brown the
surface of the food by activating the grill once cooking
is complete.
When the display shows the relevant message, if
required press
to start a five-minute browning cycle.
Once the browning function has been activated, you
can change the time for which it will run by turning the
adjustment knob. You can also stop the function at any
time by turning the selection knob to select a different
function or by turning it to
to switch the oven off.
. TIMER
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and turn the adjustment knob: The
icon will flash on the display.
Turn the adjustment knob to set the length of time you
require and then press
again to activate the timer. An
audible signal will sound and the display will indicate
once the timer has finished counting down the selected
time.
Please note: The timer does not activate any of the cooking
cycles. Use the adjustment knob to change the time set on
the timer; press
to switch the timer o at any time.
. KEY LOCK
To lock the keypad, press and hold and at the
same time for at least five seconds.
Do this again to unlock the keypad.
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched o at
any time by turning the selection knob to
.
(12 pages)
(13 pages)
(32 pages)
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals