Whirlpool PCCI 502160 X Instruction for Use download pdf (Page 3)

EN4

- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine),

remember that alcohol evaporates at high temperatures. As a result, there is a

risk that vapours released by the alcohol may catch fire upon coming into

contact with the electrical heating element.

- Overheated oils and fats catch fire easily. Always remain vigilant when cooking

foods rich in fat, oil or alcohol (e.g. rum, cognac, wine).

- Never use steam cleaning equipment.

- Do not touch the oven during the pyrolysis cycle. Keep children away from the

oven during the pyrolysis cycle. Any excess spillage must be removed from the

oven cavity before the cleaning cycle (only for ovens with Pyrolysis function).

- During and after the pyrolysis cycle, the animals have to be kept away from the

area of the appliance location (only for ovens with Pyrolysis function).

- Use only the temperature probe recommended for this oven.

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven

door glass as they can scratch the surface, which may result in the glass

shattering.

- Ensure that the appliance is switched off before replacing the lamp to avoid the

possibility of electric shock.

- Do not use aluminium foil to cover food in the cooking vessel (only for ovens

with a cooking vessel supplied).

Scrapping of household appliances

- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. Before scrapping, cut off

the power supply cable.

- For further information on the treatment, recovery and recycling of household electrical appliances, contact your competent local authority, the collection service

for household waste or the store where you purchased the appliance.

After unpacking the oven, be sure that it has not been damaged during transport and that the oven door closes properly. In the event of problems, contact the dealer

or your nearest After-sales Service. To avoid any damage, only remove the oven from its polystyrene foam base at the time of installation.

Children should not perform installation operations. Keep children away during installation of the appliance. Keep the packaging materials (plastic bags, polystyrene

parts, etc) out of reach of children, during and after the installation of the appliance.

PREPARING THE HOUSING UNIT

• Kitchen units in contact with the oven must be heat resistant (min 90°C).

• Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.

• After installation, the bottom of the oven must no longer be accessible.

• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.

ELECTRICAL CONNECTION

Be sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front edge of the oven (visible when the door

is open).

• Power cable replacement (cable type indicated on the connection label) must be carried out by a qualified electrician. Contact an authorized service centre.

INSTALLATION