Whirlpool W100329708 User Manual

INSTALLATION INSTRUCTIONS30" (76.2 CM) FREESTANDING GAS RANGESwith standard clean ovenTable of ContentsRANGE SAFETY...

105. Close the broiler door.6. Remove cooktop burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner

112. Insert a small flat-blade screwdriver into the valve stem. Turn the valve adjusting screw to obtain the smallest flame that will not go out when

12GAS CONVERSIONSGas conversions from Natural gas to LP gas or from LP gas to Natural gas must be done by a qualified installer.LP Gas ConversionTo Co

13To Convert Surface Burners1. Remove burner grate, burner caps and burners. 2. Locate LP gas orifice spuds for top burners in the literature bag incl

14Complete Conversion1. Refer to the “Make Gas Connection” section for properly connecting the range to the gas supply.2. Turn the manual shutoff valv

15To Convert Surface Burners1. Remove burner grate, burner caps and burners. 2. Locate the Natural gas orifice spuds for top burners in the literature

3. Locate Natural gas orifice spud stamped “47” in the bag containing literature supplied with the range.4. Use a ³⁄₈" combination wrench and rem

2RANGE SAFETYYou can be killed or seriously injured if you don't immediately You can be killed or seriously injured if you don'tfollow All

3INSTALLATION REQUIREMENTSTools and PartsGather the required tools and parts before starting installation. Read and follow the instructions provided w

4Location RequirementsIMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air. It is the insta

5Cabinet DimensionsCabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and36" (91

6Gas Supply RequirementsObserve all governing codes and ordinances. IMPORTANT: This installation must conform with all local codes and ordinances. In

7Burner Input RequirementsInput ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m). For elevations above 2,000

8If cabinet opening is wider than that specified in the “Location Requirements” section, adjust template so range will be centered in cabinet opening.

9Make Gas ConnectionTypical rigid pipe connectionA combination of pipe fittings must be used to connect the range to the existing gas line. Your conne