Whirlpool AMD 010 Installation Manual download pdf (Page 17)

IMPORTANT:

Piping Joints Thermal Insulation:

Wrap the piping joints with thermal insulating materials and then wrap with a vinyl tape.

Thermal Insulation piping:

a. Place the drain hose under the piping.

b. Insulation material: polythene foam over 6mm in

thickness.

NOTE: Drain hose is prepared by user.

• Drain pipe should point downward for easy drain

flow.

Do not twist the drain pipe, leave it sticking out or

waving around, do not immerse the end in water.

If an extension drain hose is connected to the drain

pipe, make sure to be thermally insulated when

passing it through the indoor unit.

• When the piping is directed to the right, piping,

power cord and drain pipe should be thermally

insulated and fixed at the rear of the unit with a

piping fixer.

A. Insert the pipe fixer to the slot.

B. Press to hook the pipe fixer onto the base.

Thermal insulation

Wrapped with vinyl type

Large pipe

Thermally

insulated tube

Small pipe

Power cord 1

(for heat-pump)

Defrost cable

(for heat-pump)

Drain hose

(prepared by user)

Power cord

Base

Piping fixer

Base

Piping fixer

Insert here

Base

Hook here

Large

pipe

Drain

hose

Small

pipe

Large

pipe

Drain

hose

Small

pipe

Downloaded from AC-Manual.com Manuals

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Whirlpool AMD 010 Installation Manual Page 17

Comments to this Manuals