Whirlpool WGD8100BW User Manual download pdf (Page 16)

4. Install the two hinges to the front panel of the dryer using

4 screws. Use the non-slotted side to attach the hinge

to the front panel.

5. Install screws in top hinge holes in the door. Do not tighten

screws. Leave approximately 1/4" (5 mm) of screw exposed.

6. Hang door by placing screw heads into top slotted holes of

hinges and slide door down. Align bottom screw holes in hinge

and door. Install two bottom screws. Tighten all hinge screws.

7. Close door to engage door strike.

Reverse the strike

1. Remove the door strike (A) from the dryer door opening.

2. Remove the cosmetic screw (B) opposite the door strike (A).

A. Door strike

B. Cosmetic screw

3. Reinstall the door strike and cosmetic screw on the opposite

side of dryer door opening from where they were removed.

NOTE: Door strike and plugs must be on the same side

of the dryer door opening.

Reinstall the door

1. Remove the 4 screws and two hinges from the dryer door.

2. Replace the 4 screws in the same holes

3. Remove the 4 screws from the opposite side of the door.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Whirlpool WGD8100BW User Manual Page 16