Whirlpool 20RID4LA+ Instruction for Use download pdf (Page 14)

After switching on the refrigerator, it usually takes overnight for the

first ice cubes to form. When selecting crushed ice, the cubes are

crushed just before being dispensed, therefore the crushed ice may

come out with a slight delay. Noise from the ice crusher is normal,

and pieces of ice may vary in size. When changing from crushed ice

to ice cubes, a small amount of crushed ice may come out together

with the first cubes.

Normal ice production consists of about 12 to 14 batches of ice

cubes in a 24-hour period. The quantity and size of the ice cubes

depend on the mains water pressure. Ice cubes production can be

increased by decreasing the temperature on the freezer

compartment.

Recommendations for the use of the automatic ice maker.

When the door of the freezer compartment is open, ensure that the

small flap, which functions as a sensor to stop the distribution of ice

from the automatic ice maker to the ice container located on the

inner door is not obstructed.

To remove and replace the ice container

1. Insert your fingers in the opening at the bottom of the container

and place your thumb on the release button.

2. Holding the base of the container with both hands, press the

release button, lift the container upwards and remove.

To replace the ice container in its place, place it on its support

attached to the inner door and lower in position.

Note: Large amounts of ice cubes should be taken directly from the

bucket, and not from the dispenser.

USING THE AUTOMATIC ICE-MAKER

501931502018_GB 18-06-2007 14:56 Pagina 16

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

Whirlpool 20RID4LA+ Instruction for Use Page 14