Whirlpool Room Air Conditioners for Slider & Casement Windows Use and Care Guide download pdf (Page 9)

Starting Your Air Conditioner

1. Set air exchanger. See “Air Exchanger.”

2. Press POWER to turn on air conditioner.

NOTE: When the unit is turned on, it will display the previous

settings for the Mode, Fan Speed and temperature.

3. Choose mode. See “Mode.”

4. Choose fan speed. See “Fan Speed.”

5. Choose temperature. See “Temperature.”

Air Exchanger

Set the Air Exchanger control to CLOSED for maximum

continuous cooling. The Air Exchanger set to OPEN circulates

fresh air and draws stale or smoky air from the room.

■ Open - to exhaust room air to the outside

■ Closed - maximum air circulation and cooling

Mode

1. Press and hold MODE.

2. Choose COOL, FAN ONLY or POWER SAVER.

■ Cool - Cools room. Press FAN SPEED to choose fan

speed. Then adjust the temperature by pressing the up or

down arrow buttons.

■ Fan Only- Operates the fan at Low, High or Turbo speed,

without cooling.

■ Power Saver - The fan will switch from the set fan speed

to LOW whenever the compressor turns off in response to

the set temperature. When the compressor cycles back

on, the fan will return to the set fan speed.

Fan Speed

1. Press and hold FAN SPEED.

2. Choose AUTO, TURBO, HIGH or LOW.

When Auto is selected, the fan speed will change

automatically as the temperature in the room changes.

■ 7º or more above the set temperature will use Turbo.

■ 4º - 7º above the set temperature will use High.

■ 4º or below the set temperature will use Low.

Temperature

■ Press the TEMP plus pad to raise the temperature 1º until it

reaches 88ºF (31ºC).

■ Press the TEMP minus pad to lower the temperature 1º until it

reaches 66ºF (19ºC).

NOTE: By pressing both pads at once, the display will switch

from ºF to ºC.

Timer Delay

To set the Timer for a 1- to 24-hour delay until the air

conditioner turns on (the air conditioner must be Off):

1. Press TIMER. Indicator light remain on.

2. Press the plus or minus pad to change the delay time from

1 to 24 hours.

3. To turn Timer off, press TIMER again.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments

Whirlpool Room Air Conditioners for Slider & Casement Windows Use and Care Guide Page 9

Comments to this Manuals

Related products and manuals for Storage chests & cabinets & trunks Whirlpool Room Air Conditioners for Slider & Casement Windows