Whirlpool AWZ 8CD S/PRO Use and Care Guide download pdf (Page 6)

6

he has access that the plug

remains removed.

SOUND LEVEL

Sound pressure level,

Lpa <70 dB(A)

(Kpa: +/– 2,5 dB(A)

damaged or dropped. Do not

immerse the mains cord or

plug in water. Keep the cord

away from hot surfaces

The electrical components

must not be accessible to the

user after installation.

Do not touch the dryer with

any wet part of the body

and do not operate it when

barefoot.

CORRECT USE

Do not exceed the maximum

load allowed. Check the

maximum load allowed in the

programme chart.

Do not dry unwashed items in

the tumble dryer.

Do not overdry the laundry.

Take care that no lint or dust is

accumulated around the dryer.

Fabric softeners, or similar

products, should be used as

specied by the fabric softener

instructions.

CLEANING AND

MAINTENANCE

The dryer must be

disconnected from the power

supply before carrying out

any cleaning or maintenance

operation.

Never use steam cleaning

equipment.

The dryer shall be

disconnected from the power

supply during service and

when replacing parts. The

operator must be able to check

from any of the points to which

a ventilation grid (minimum

45cm x 8 cm), in the rear part

of the worktop under which

the dryer is installed.

ELECTRICAL WARNINGS

Make sure the voltage

specied on the rating plate

corresponds to that of your

home.

For installation to comply with

current safety regulations,

an omnipolar switch with

minimum contact gap of 3mm

is required.

Regulation require that the

dryer is earthed.

For dryers with tted plug,

if the plug is not suitable for

you socket outlet, contact a

qualied technician.

Do not use extension leads,

multiple sockets or adapters.

Do not connect the dryer to a

socket which can be operated

by remote control.

The power cable must be

long enough for connecting

the dryer, once tted in its

housing, to the main power

supply.

Do not pull the power supply

cable.

If the power cable is damaged

it must be replaced with an

identical one. The power

cable must only be replaced

by a qualied technician

in compliance with the

manufacturer instruction and

current safety regulations.

Contact an authorized service

centre.

Do not operate this dryer if

it has a damaged mains cord

or plug, if it is not working

properly, or if it has been

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comments to this Manuals

No comments