Whirlpool HDLX 80312 Use and Care Guide download pdf (Page 28)

Your dryer is equipped with various automatic safety

functions. These enable failures to be detected in good

time and the safety system can react appropriately.

These failures are frequently so minor that they can be

removed within a few minutes.

TROUBLESHOOTING

GUIDE & AFTER-SALES

SERVICE

Problem Possible Cause Solution

DRYING TAKES TOO LONG

LAUNDRY IS NOT DRY ENOUGH

Selected programme not

optimum for type of laundry

• Select the programme

matching best the type of

laundry; refer to section

PROGRAMMES

Door lter or bottom lter

clogged

• Clean the lters according to

the instructions in section CARE

AND MAINTENANCE

Laundry too wet • Make sure that laundry is spun

with the maximum spin speed

before drying. If laundry was

spun with spin speed below 800

rpm, the water tank may get full

during the drying programme.

The ambient temperature is too

high

• The ambient temperature is

ideal between 15 and 20°C. If the

ambient temperature is higher,

air the room.

“Gentle option” selected • The “Gentle option” should

only be selected with small loads

1 ... 27 28 29 ... 40

No comments

Whirlpool HDLX 80312 Use and Care Guide Page 28