Whirlpool HSCX 70311 Use and Care Guide download pdf (Page 33)

Your dryer is equipped with various automatic safety

functions. These enable failures to be detected in good

time and the safety system can react appropriately.

These failures are frequently so minor that they can be

removed within a few minutes.

TROUBLESHOOTING

GUIDE & AFTER-SALES

SERVICE

Problem Possible Cause Solution

DRYING TAKES TOO LONG

LAUNDRY IS NOT DRY

ENOUGH

Selected programme not

optimum for type of laundry

• Select the programme

matching best the type of

laundry; refer to section

PROGRAMMES

Door lter or bottom lter

clogged

• Clean the lters according to

the instructions in section CARE

AND MAINTENANCE

Laundry too wet • Make sure that laundry is spun

with the maximum spin speed

before drying. If laundry was

spun with spin speed below 800

rpm, the water tank may get full

during the drying programme.

The ambient temperature is too

high

• The ambient temperature

is ideal between 15 and 20°C.

If the ambient temperature is

higher, air the room.

DRYER DOES NOT START,

ALTHOUGH START/PAUSE HAS

BEEN PRESSED

Door not properly closed • Push door to close it until it

clicks shut

Key lock is activated • Press and hold the button

with the key symbol until the

display indicates that the keys

are unlocked.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Comments to this Manuals

No comments

Whirlpool HSCX 70311 Use and Care Guide Page 33

Comments to this Manuals

Related products and manuals for Tumble dryers Whirlpool HSCX 70311