Whirlpool WRE 7302 Use and Care Guide download pdf (Page 30)

FAILURE INDICATOR AND MESSAGES

Make sure to

• Empty the water tank after each programme

• Clean the door lter after each programme

• Clean the bottom lter every ve cycles

Refer to section CARE AND MAINTENANCE for

emptying water tank or cleaning ﬁlters.

Failure Indicator Possible Cause Solution

The empty “Wasserbehälter leeren

/ Vider réservoir / Water Tank”

lights on

Water tank may be

• lled with water • Empty water tank; make sure to

insert it properly afterwards.

• not correctly positioned • Push in the water tank to make

sure that it is correctly inserted in

the tank compartment.

The “Wärmetauscherﬁlter / Filtre

de socle / Bottom Filter” lights on

Bottom ﬁlter may be

• blocked by lint • Clean the bottom lter;

make sure to insert it properly

afterwards

• not correctly positioned • Push in the bottom lter and

move the release levers into

vertical position, to make sure

that the ﬁlter is correctly inserted

in the ﬁlter compartment. Close

the ﬂap.

The “Türﬁlter / Filtre de porte /

Door Filter” lights on

Door ﬁlter may be

• blocked by lint • Remove and clean the door

ﬁlter; make sure to insert it

properly afterwards so that it

completely integrates in the ﬁlter

compartment.

• not correctly positioned • Check position of the door

ﬁlter; make sure that it is properly

inserted in the ﬁlter compartment.

1 ... 29 30 31 ... 40

No comments

Whirlpool WRE 7302 Use and Care Guide Page 30