Whirlpool ACG052XJ0 User Manual download pdf (Page 6)

The louvers in the top and sides of

the front panel allow you to control

the direction of the cooled air. Rotate

the top louvers up or down and the

side louvers from side to side to

change air flow direction.

There are many things you can do to help save energy.

When your air conditioner is operating normally, you may hear sounds such as:

Changing air direction

Saving energy

Normal operating sounds

• Droplets of water hitting the condenser, causing a

“pinging” or “clicking” sound. The water droplets

help cool the condenser.

• Air movement from the fan.

• Vibrations or noise due to poor wall or window

construction.

• A high-pitched hum or pulsating noise caused by

the modern high-efficiency compressor cycling on

and off.

• Improve your home's insulation. Seal doors and

windows. Close fireplace flue.

• Close blinds or drapes on the sunny side of your

house. Add awnings.

• Make sure drapes or furniture do not block airflow

from your air conditioner.

• Turn lights and appliances off when they are not

needed.

• Ventilate your attic. High temperatures in the attic

add to the air conditioner's cooling load.

• Try not to use heat-producing appliances during the

hottest part of the day.

• Keep heat registers and cool-air returns closed.

• Use exhaust vent fans while cooking, doing laundry,

or bathing.

CHECK FILTER

The CHECK FILTER indicator light comes

on every 720 hours of air conditioner

operation indicating that the filter needs to

be cleaned or replaced. Press the FILTER

RESET key to reset the CHECK FILTER.

The indicator light will turn off. To clean filter,

see page 10.

OFF mode

Press the OFF key to turn the air

conditioner off. Once turned off, the mode,

fan speed and temperature are stored and

are returned to the display the next time

the air conditioner is turned on.

CHECK

FILTER

RESET

OFF

SLEEP MODE

Press the SLEEP key to select the SLEEP

mode. The SLEEP indicator light will light

up. Press SLEEP key again to turn it off,

and the indicator light will go off.

SLEEP mode operates in the COOL mode at low fan

speed. This mode allows the room temperature in the

FAN SPEED SELECTION

Press the FAN SPEED key until you see the

indicator light come on for the desired setting.

Choose LOW, HIGH, or TURBO. When the

air conditioner is operating at LOW, HIGH, or

TURBO, the fan circulates air continuously.

LOW - Sleeping comfort

HIGH - Normal cooling

TURBO - Maximum cooling

You can select the FAN SPEED during the COOL or

FAN ONLY modes. If you change the fan speed during

AUTO COOL mode, the mode will change to COOL

mode.

TURBO

HIGH

LOW

FAN SPEED

SLEEP

first two hours to increase 3°F above your preset

temperature. It will maintain this temperature until

SLEEP mode is turned off. During this mode the

display’s light intensity will decrease. SLEEP mode is

available in COOL mode only, not in AUTO COOL or

FAN ONLY mode.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments

Whirlpool ACG052XJ0 User Manual Page 6

Comments to this Manuals

Related products and manuals for Unknown Whirlpool ACG052XJ0