Whirlpool IUPS 1722 F J Instruction for Use download pdf (Page 8)

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully. They

contain important information for safe use, for installation

and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-

free room.

2. Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top

part of the appliance and any furniture above it, and

at least 5 cm between the sides and any furniture/

side walls.

4. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between

the appliance and the wall behind it, fit the spacers

supplied in the installation kit, following the

instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place

it vertically and wait at least 3 hours before connecting it

to the electricity mains. Before inserting the plug into the

electrical socket ensure the following:

• The appliance is earthed and the plug is compliant

with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located inside the freezer

(e.g. 150 W).

• The voltage is in the range of values indicated on the data plate

located inside the freezer (e.g. 220-240V).

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the plug,

ask an authorised technician to replace it (

see

Assistance

). Do not use extension cords or multiple

sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (

see Installation

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes after

being switched on. The compressor also starts each time the

power supply is cut off whether voluntarily or involuntarily

(blackout).

1. Insert the plug into the socket and make sure that the green

POWER indicator light illuminates (the TEMPERATURE

ADJUSTMENT knob must be in the OFF position).

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value and press the SUPER FREEZE button (rapid freezing):

the SUPER FREEZE indicator light

will illuminate. It will switch

off once the freezer has reached its optimal temperature. At this

point food may be placed inside the appliance.

Using the freezer to its full potential

• Use the TEMPERATURE CONTROL knob to adjust the

temperature.

MIN = warmest

MAX = coldest

is the optimal temperature for energy saving levels.

We recommend, however, a medium position.

• Do not re-freeze food that is defrosting or that has already

been defrosted. These foods must be cooked and eaten

(within 24 hours).

• Fresh food that needs to be frozen must not come into contact

with food that has already been defrosted. Fresh food must be

stored in the top FREEZER and STORAGE compartment.

• Do not place glass bottles which contain liquids, and which are

corked or hermetically sealed in the freezer because they

could break.

• The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties located

within the freezer (for example: Kg/24h: 4).

• To freeze (if the freezer is already operating):

- for small quantities which are less than those indicated on the

data plate, press the rapid freezing SUPER FREEZE button

(corresponding indicator light

illuminates), insert the food

and close the door. The function is disabled automatically after

24 hours or when optimal temperatures have been reached

(indicator light goes out);

- for large quantities which are greater than the maximum load

indicated on the data plate, hold down the rapid freezing SUPER

FREEZE button until the corresponding indicator light begins to

flash. After 24 hours the indicator light stops flashing and remains

on constantly. Place the food inside the freezer and close the

door. After another 24 hours, the function will be disabled

automatically (indicator light goes out).

! Do not open the door during freezing.

1 2 3 4 5 6 7 8 9 ... 28

Comments to this Manuals

No comments

Whirlpool IUPS 1722 F J Instruction for Use Page 8

Comments to this Manuals

Related products and manuals for Unknown Whirlpool IUPS 1722 F J