Whirlpool TRAK 6467 BK Instruction for Use download pdf (Page 6)

14

$

In some dryer models the vent

hose together with an adaptor

is supplied in the drum. If the

hose and adaptor are not

supplied as a standard the

optional accessory AMH 577 kit,

available at your dealer, can be

used.

Installing the vent hose

A.

Place a towel or the packing

material on the right-hand

side next to the dryer.

B.

Place the dryer on its right-

hand side (seen from the

front) on the towel or the

packing material.

C.

Push the adapter into the

hose (see illustration). Attach

the air vent hose adapter to

the connection located under

the dryer and lock it by

means of the foreseen lugs.

Venting outside

•

Without kinking it, lead the

vent hose outside (inside

diameter 10 cm, maximum

length with two bends 3 m).

•

Ensure that the vent hose

does not sag when stacking

the dryer on a washing

machine. It should only be

placed horizontally or

upwards.

•

Do not connect to ventilation

systems protected by fly nets.

These can become clogged

and cause malfunctioning of

the dryer.

•

Do not connect the air vent

hose to a chimney or to a

mechanical ventilation

extractor duct.

•

Do not connect the vent hose

to the heating system. Only

connect the hose to

ventilation systems insulated

against humidity.

Dryer operation without

vent hose

•

Only use the dryer in a large,

well-ventilated room.

•

Keep the room free of dust.

A minimum distance of

10 cm between rear of

appliance and the wall must

be observed.

Dryer placed close to the

wall; venting to the left or

right

Install the dryer by using the

bi-directional kit AMH 869,

available at your dealer, should

be used.

C

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments