Whirlpool AWG 328 User Manual download pdf (Page 24)

Ad j ustment of feet

• Do not install your machine on rugs or similar surfaces.

• For your machine to work silently and without vibrations, it should be settled

on a flat, non-slippery and tough surface.

• You can adjust the balance of your machine from its feet.

• First, loosen the plastic adjustment nut.

• Adjust by rotating the feet upwards or downwards.

• After balance has been achieved, tighten the plastic adjustment nut again by

rotating it upwards.

• Never put cartons, wooden blocks or similar materials under the machine to

adjust the levelness of the machine with the ground.

Electrical connection

• Yourwashing machine works with 220-240V and 50Hz.

• A special grounded plug has been attached to the network cable of your

washing machine. This plug must be inserted to a grounded 10 amp socket. The

currency rating of the attached electricity supply should also be 10 amps. If you

have no such sockets and fuses in your house, the plug should be fitted by a

qualified electrician.

• Our company will not be held liable for any damage that may occur as a result

of usage without grounding.

Water supply connection

• Depending on the specifications of your machine, it may be provided with a

single water inlet (cold) or double water inlet (cold/hot). The white headed hose

is for the cold water inlet and red headed hose is for the hot water inlet (for

machines with hot 8t cold water inlet).

• To prevent leakage from the connection joints, 1 (valid for cold water inlet)

or 2 (valid for machines with hot 8t cold water inlet) seals are included in the hose

packaging. Fit these seals at the end of water inlet hoses on the tap side.

• Connect the white headed hose to the water inlet valve with white filter and

connect the red headed hose to the water inlet valve with red filter (latter in the

case of machines with hot & cold water inlet). Manually tighten the connection

parts. Please call a qualified plumber for safer connections.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

Whirlpool AWG 328 User Manual Page 24