![](/jointfilesconvert/1552902/bg2.png)
2
DOOR REVERSAL OPTIONS
If desired you may change your door to open from the
left instead of the right, using the following directions:
If your door looks like this,
follow the Squared-Off
Dryer Door Instructions
(steps 1-15):
If your door looks like this,
follow the Round Dryer
Door Instructions (steps
16-29):
Remove screws from door hinge
1.
Remove screws from door
2.
Lift out inner door assembly
3.
Detach door from its original location by removing all four screws
from door hinge, as shown.
IMPORTANT: Avoid damaging or scratching door by laying on
a soft cloth in your work space.
Remove all six screws to separate the inner door assembly from
the outer door assembly, as shown.
Lift out inner door assembly and set aside in a safe location.
SQUARED-OFF DOOR
REVERSAL INSTRUCTIONS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Flat-blade screwdriver
Parts supplied:
Bolt hole cover labels (2 small, 1 large)
NOTE: If your dryer already has plastic bolt hole covers, you
may reuse them to complete door reversal, or you may replace
plastic covers with labels provided.
Phillips screwdriver
Comments to this Manuals