Whirlpool WET3300XQ User Manual download pdf (Page 22)

Turn on water faucets to check for leaks. A small amount of

water may enter washer. It will drain later.

6. Check for leaks

Secure drain hose to laundry tub leg, drain standpipe, or inlet

hoses for wall standpipe with shipping strap removed earlier.

7. Secure drain hose

4.5"

(113 mm)

4.5"

(113 mm)

4.5"

(113 mm)

4.5"

(113 mm)

4.5"

(113 mm)

Laundry Tub Standpipe Wall

CONNECT VENT

Connect vent to exhaust outlet

Move washer/dryer to nal location

Using a 4" (102 mm) clamp, connect vent to exhaust outlet

in dryer. If connecting to existing vent, make sure vent is

clean. Dryer vent must t over dryer exhaust outlet and inside

exhaust hood. Check that vent is secured to exhaust hood

with a 4" (102 mm) clamp.

Move washer/dryer to nal location, taking care not to crush

or kink vent.

After washer/dryer is in place, remove corner posts and

cardboard from under washer/dryer.

CONNECT INLET HOSES

Connecting from front

(for closet or recessed

area)

Connecting

from rear

4.5"

(114 mm)

4.5"

(114 mm)

4.5"

(114 mm)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

No comments

Whirlpool WET3300XQ User Manual Page 22