Whirlpool FSCR12433 Use and Care Guide download pdf (Page 17)

Select options, if needed

Press the options button. The options which

are selectable for the programme appear on

the display.

• Press the UP or DOWN key to navigate through

the list of options.

• Press the OK key to select an option; the option

symbol lights up on the control panel.

Options may not be combinable with each other.

When selecting an option, the non-combinable

option will be deactivated automatically if this is

the case.

Some options / functions can be selected by

directly pressing the button:

If such an option is not selectable for the

programme, it switches o automatically when the

button is pressed.

Refer to section PROGRAMMES AND OPTIONS for

more information.

6. ADD DETERGENT

• If you do not use the Dosing Aid function,

pull out the detergent dispenser and

add detergent (and additives/softener) now, as

indicated in section DETERGENT DISPENSER.

Observe the dosing recommendations on the

detergent pack. If you have selected PREWASH

or FINISH IN, observe the instructions in section

FUNCTIONS. Afterwards carefully close the

detergent dispenser again.

• If you use the “Dosing Aid” function, add

detergent later, after you have started the

programme. Refer to section DOSING AID/DAILY

USE.

Correct dosing of detergent / additives is

important, because

• it optimizes the cleaning result

• it avoids irritating residues of surplus detergent in

your laundry

• it saves money by avoiding waste of surplus

detergent

• it protects the washing machine by avoiding

calcication of components

• it respects the environment by avoiding

unnecessary environmental burden

7. START PROGRAMME

• Press and hold “Start/Pause” until the

button lights up solidly; the programme

starts.

• The drum turns, and the load is detected. The

display indicates the load sensing, while on the

control panel an animation occurs.

• If you have selected “Dosing Aid”, the washing

machine indicates the recommended detergent

amount for your laundry load a short time after

programme start. – Add your detergent to the

main wash compartment of the detergent

dispenser, or directly into the drum in a detergent

ball.

• If you have selected “Dosing Aid” and also

“Prewash”, the washing machine will alternately

indicate you the recommended detergent

amount for the Prewash (I) and the Main wash (II)

compartment.

Add the recommended detergent amounts to the

compartments and press “Start/Pause” to

proceed with the programme.

• To avoid overow, do not open the detergent

dispenser during a running programme anymore.

• The remaining programme duration which is

indicated on the display can vary. Factors like

unbalance in the wash load, or foam formation,

can have an eect on the programme duration.

Whenever the remaining programme duration is

calculated newly, the display indicates the

sensing, and an animation occurs on the control

panel.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Comments to this Manuals

No comments

Whirlpool FSCR12433 Use and Care Guide Page 17

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool FSCR12433