Whirlpool AUTOMATIC WASHER Specifications download pdf (Page 46)

4-6

REMOVING A DISPENSER, THE

FRESH FILL INLET VALVE, AND THE LID LOCK

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before

operating.

Failure to do so can result in death or

electrical shock.

1. Unplug washer or disconnect power.

2. Raise the washer lid.

WARNING

NOTE: The removal procedure for the three

dispensers is the same so only one will be

shown removed.

3. To remove a dispenser:

a) Use a small screwdriver and pry out

on the three dispenser cover tabs

while you lift the cover off the dispens

-

er (see the top right photo).

Dispenser Cover

Pry Out Tab

b) Squeeze the bottom of the dispenser,

and release the hooked segments at

the top of the dispenser from the cabi

-

net, then push the dispenser out of its

cutout.

Hook

Dispensers

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Comments to this Manuals

No comments