Whirlpool AWM 1011 Instruction for Use download pdf (Page 8)

REMOVING THE FILTER

Removing The Filter

The filter must be taken out if:

•

the washing machine does not drain properly,

•

small items, e. g. buttons and coins rattle in the pump and

•

2 to 3 times a year for inspection.

You must remove the residual water before taking out the

filter. Carry out the steps in the “Draining Residual Water”

section, but only up to point 4. Then follow the points

given below.

Open the filter but do not withdraw it completely.

Slowly turn the handle anticlockwise until the water

drains out. Make sure that the water has cooled before

letting it drain.

Wait until all the water has drained out.

Now unscrew the filter completely and extract it.

Clean the filter and the filter chamber.

Insert the filter with the guide pin upwards and screw

it in clockwise.

Lay the hose in the cover, fold the cover up and close

it using the detergent dispenser insert or a coin. The

dot points to the closed lock.

Pour about 1 l of water into the detergent dispenser to

reactivate the Eco System. You must also put the plug

back into the socket.

You can now load the washing machine and start the

desired programme.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Whirlpool AWM 1011 Instruction for Use Page 8