Whirlpool AWM 8121 Instruction for Use download pdf (Page 13)

Home

Appliances

TRANSPORT AND HANDLING

INSTALLATION

Never move the appliance by carrying by the worktop.

Unplug the appliance.

Turn off the tap.

Remove the water supply and drain hose.

Eliminate all water from the hoses and from the appliance (see “Removing the Filter”, “Draining

Residual Water”).

Fit the transit bolts (obligatory)

(see “Installation Instructions”).

Remove the transit bolts

Slacken the four bolts with the spanner supplied

(Fig A)

Fully unscrew the bolts by hand.

Holding the bolt head, pull each bolt and plastic spacer

through the wide part of the holes

(Fig B)

Close the holes with the plastic covers supplied; insert

the covers in the wide part of the hole and slide them

toward the narrow part until they click into place

(Fig C)

Keep the transit bolts and plastic spacers for future use.

•

Whenever the appliance is transported, the transit bolts

must be refitted:

Pry off the plastic covers with a screwdriver, slide them

in the opposite direction of the arrow and remove.

Insert the transit bolts, performing the steps for

removal in reverse order.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Whirlpool AWM 8121 Instruction for Use Page 13